Seymour Duncan Blackouts AHB-1 Humbucker Set

Seymour Duncan Blackouts are 9-volt active neck and bridge humbuckers that provide more extended frequency response with less compression. Seymour Duncan engineers have captured the tone players want in an active design with the benefits of balanced inputs.

Not only do Seymour Duncan Blackouts active humbuckers have less hum than most active humbuckers, they also have more lows, more highs, and more output. Simply put, the Blackouts have more tone than most active pickups. Players will find far fewer problems with hum, especially near computer monitors and fluorescent lighting.

Blackouts come as a two-pickup set of neck and bridge humbuckers. All versions come with all necessary mounting hardware, including pots, jack, and a battery clip.

 

 

Specifications:

AHB-1 Blackout Neck Model Specifications

• Resonant Frequency: 750 Hz
• Average Output Voltage: 0.65 Volts RMS (1)
• Maximum Output Voltage: 2.60 Volts RMS (2)
• Noise: -97dBV
• Output Impedance: 1K Ohm
• Current Consumption: 350 micro-amperes
• Battery Life: 1420 hours (3)
• Preamp Topology: Discrete hybrid differential, FET input
• Preamp Gain: 16 dB
• Preamp THD at 1V: .003%

AHB-1 Blackout Bridge Model Specifications

• Resonant Frequency: 530 Hz
• Average Output Voltage: 2.00 Volts RMS (1)
• Maximum Output Voltage: 2.60 Volts RMS (2)
• Noise: -96dBV
• Output Impedance: 1K Ohm
• Current Consumption: 350 micro-amperes
• Battery Life: 1420 hours (3)
• Preamp Topology: Discrete hybrid differential, FET input
• Preamp Gain: 18 dB
• Preamp THD at 1V: .003%

Notes:

• (1) Output voltage measured under the following conditions:
• a. Pickups installed in a guitar and set up for typical playing conditions.
• b. Neck pickup adjusted approx. 3/16" from strings.
• c. Bridge pickup adjusted approx. 1/8" from strings.
• d. String gauge used - .010 to .046
• e. Open E-chord strummed at moderate intensity.
• f. 5 sample average reading taken using storage oscilloscope.
• (2) Maximum output voltage is taken at the onset of clipping in the preamp when powered from a 9 Volt source.
• Battery life computed for one pickup. Divide by two for life of set.

Price Range : USD168.95 - USD173.95

Fender Deluxe Roadhouse Stratocaster Electric Guitar

3 Tone Sunburst

Arctic White

Black

The Fender Roadhouse offers a classic Strat configuration constructed with upgraded cosmetics and premium Texas Special pickups. An Ensenada-built version of the Roadhouse Stratocaster, this attractively priced picking machine features a brown shell pickguard, tinted maple neck, and Texas Special single coil pickups for sweet tone.

Features:

• Body: Alder
• Neck: 1-Piece Tinted Maple, "C" Shape (Satin Urethane Finish)
• Fingerboard: Maple, 9.5" Radius (241mm)
• Frets: 21 Medium-Jumbo
• Scale: Length 25.5" (648 mm)
• Width @ Nut: 1.650" (42 mm)
• Hardware: Chrome
• Machine Heads: Fender/Ping Standard Cast/Sealed Tuning Machines
• Bridge: Vintage-Style, Synchronized Tremolo
• Pickguard: 4-Ply Brown Shell
• Pickups: 3 Texas Special Single-Coil Strat Pickups
• Pickup Switching- 5-Position Blade:
• Position 1. Bridge Pickup
• Position 2. Bridge and Middle Pickup
• Position 3. Middle Pickup
• Position 4. Middle and Neck Pickup
• Position 5. Neck Pickup
• Controls: Master Volume, Tone 1 (Neck pickup), Tone 2 (Middle Pickup)
• Finish: Polyester Finish
• Strings: Fender Standard Tension Bullets ST3250L, Nickel Plated Steel
• Gauges: (.009, .011, .016, .024, .032, .042), p/n 073-3250-003
• Unique Features: Tinted Neck, Brown Shell Pickguard, Texas Special Pickups

Price Range : USD599.99 - USD619.99 
 

Epiphone Les Paul Plustop PRO/FX Electric Guitar

Vintage Sunburst

Honey Burst

Desert Burst

Heritage Sunburst

Epiphone's Les Paul Plus Top Pro/FX has all the great features and looks of a Les Paul but adds a double-locking Floyd Rose tremolo and coil-splitting for an amazing combination of crunch and versatility.

In the neck position is Epiphone's Alnico Classic humbucker, which provides warmth and subtle tone with a full, even response that doesn't hold back when you need that classic humbucker crunch. In the bridge position is the Alnico Classic Plus humbucker. A perfect companion to the Classic, it is overwound for a slightly higher output without sacrificing its rich, vintage tone. Both feature Alnico-II magnets, enamel wire, and are double vacuum waxed. 4-wire output on each pup allows for coil-tapping, and this Les Paul guitar takes full advantage of it with push/pull potentiometers on both volume controls. Combined with the 3-way toggle, these give you 8 killer tones in one great Les Paul guitar.

The Epiphone Pro/FX guitar features a Floyd Rose Special nickel-plated tremolo. The Les Paul body is routed out in back of the tremolo to allow for pitch raising up to 2-1/2 steps while the downward range is wide enough to get the strings slack. It's combined with an R4 locking nut for improved tuning stability. As with all great Epiphone Les Paul guitars, the Pro/FX features a solid Mahogany back with a highly flamed maple top and a solid mahogany neck that's hand-fitted and glued into the body for excellent neck-to-body contact. The neck features a SlimTaper "D" profile that's both comfortable and fast.

Other features on the Epiphone Les Paul guitar include quality Grover machine heads, LockTone Tune-O-Matic/stopbar, and Epiphone's own StrapLocks. 

Features:

• Top: flamed maple
• Back: mahogany
• Neck: set mahogany
• Scale length: 24-3/4"
• Neck shape: SlimTaper "D"
• Tuners: Grover
• Fretboard: rosewood
• Number of frets: 22
• Nut width: 1-11/16"
• Neck pickup: Alnico Classic
• Bridge Pickup: Alnico Classic Plus
• Controls: 2 volumes, 2 tones with coil-splitting, 3-way toggle
• Pickup selections:
• 1) Neck humbucker
• 2) Bridge humbucker
• 3) Neck/Bridge humbucker
• 4) Neck single-coil
• 5) Bridge single-coil
• 6) Neck/Bridge single-coil
• 7) Neck humbucker/Bridge single-coil
• 8) Neck single-coil/Bridge humbucker
• Bridge: Floyd Rose Special tremolo
• Hardware plating: nickel

Price Range : USD499.00 - USD519.999

Jackson DXMG Dinky Electric Guitar

Gun Metal Grey

Black

DXMG Dinky Electric Guitar features a basswood body, bolt-on maple neck with a reversed headstock, 24-fret compound radius rosewood fingerboard with sharktooth inlays, EMG-HZ humbucking pickups, Jackson double-locking tremolo and black hardware. This guitar is ideal for metal guitar playing styles.

Features

• Body Style: Dinky
• Body: Basswood
• Neck Type: Bolt-On Rock Maple with Scarf Joint Head Stock
• Neck Binding: Ivoroid Binding on Neck and Headstock
• Fingerboard: Rosewood
• Fingerboard Radius: 12" to 16" Compound Radius / 304.8 mm to 406.4 mm
• Number of Frets: 24
• Fret Size: Jumbo Frets
• Inlays: MOTO Shark
• Bridge Pickup: EMG HZ
• Neck Pickup: EMG HZ
• 3-Position Blade pickup switching:
• Controls: Master Volume, Master Tone
• Hardware: Black
• Bridge: Floyd Rose Licensed Jackson Low Profile JT580 LP double-locking 2-Point Tremolo
• Tuners: Sealed Die-Cast Tuners
• Strings: NPS, Gauges: .009, .011, .016, .024, .032, .042Fin Position Inlays
• 25-1/2" scale length
• Neck dimensions: 1st fret: .775", 12th fret .880"
• 1-11/16" nut width

Price Range : USD599.99 - USD619.99

Gibson 500T Super Ceramic Bridge Humbucker Electric Guitar Pickup

The Gibson 500T Super Ceramic Humbucker's powerful multi-ceramic magnet structure enables this monster to cover lots of territory. This Gibson ceramic pickup can scream or growl—never losing its rich combination of enhanced lows and crystal-clear highs. Double black open coils. The 500T pickup comes with 4-conductor shielded wiring.

Features:

• Powerful ceramic magnet structure
• Enhanced lows and clear highs
• Double black open coils
• 4-conductor shielded wiring
• Perfect for hard rock

Price Range : USD119.99 - USD139.99

Electro-Harmonix Classics USA Big Muff PI Distortion / Sustainer Guitar Effects Pedal

The Electro Harmonix USA Big Muff Pi is a remake of the classic fuzz / distortion pedal made famous in the 60's and 70's. Nothing gives you warm fuzz and distortion tones like the original, the Electro Harmonix USA Big Muff Pi Fuzz / Distortion pedal!

Like the legendary Big Muff Pi of the '70s, the reissue Electro-Harmonix USA Big Muff Pi Distortion/Sustainer Pedal has 3 controls that let you dial in the finest harmonic distortion/sustain ever produced. The Volume control adjusts the output level. The Sustain control optimizes the long sustain with just the right amount of harmonic distortion. The Tone control provides a range of sounds, from warm bass to crisp treble.

The Big Muff Pi is one of the earliest Distortion pedals ever created! This distortion has seen the hands of such musicians as Hendrix and Santana all the way to Chemical Brothers and Korn. The Big Muff has a creamy and violin-like Sustain and fuzz, with a versatile Tone control that can boost low end and midrange. You can emulate classic distortion and overdriven tones that usually come out of a saturated tube amp. This timeless piece from Electro Harmonix, has been defining the sound of rock guitar for the past 30 years. Pick one up and continue the tradition! This is the Made in USA version.

Price Range : USD79.35 - USD89.99

Fulltone FatBoost 3 FB-3 Guitar Effects Pedal

The Fulltone FatBoost 3 is a discrete, Class-A, FET (Field-Effect-Transistor) guitar pedal offering up to 35dB of non-distorted gain without changing your signature sound, unless you want that. You can fatten/distort your tone, brighten or mellow up the sound, add or subtract bass, and even add harmonics. The FB-3 has true-bypass switching (via the Fulltone 3PDT) and incorporates a super-bright LED without the loud popping sound thanks to Fulltone's proprietary anti-pop circuitry.

FET's can behave like tubes in a properly designed circuit. They can clip (distort) in a pleasing way instead of being buzzy or spiky-sounding (like a transistor) and can also add a subtle limiting to the signal which can even out the volume making your live and recorded tones more pleasing to the ear. If you're a recording engineer, you'll be happy to know you can use the Fulltone FatBoost 3 on everything from acoustic and electric guitar to electric bass, and even snare drums.

The FatBoost 3 pedal works great in front of non-Master Volume tube amps to goose them into submission, as well as through Master Volume amps to drive them much harder than possible with just your guitar alone. It also works very well on bass, acoustic guitars (with pickups), and is ideal at the end of a pedalboard effects chain to completely eliminate the tone loss caused by long guitar cable runs back to your amp. Doing so will allow the use of 50' (or longer) cable lengths with no signal degradation whatsoever.

This version of the Fulltone FatBoost (FB-3) incorporates all of the things that people have loved about previous versions of these effects pedals in the past without any of the shortcomings. It brings back the 11-step FET Bias Drive knob that was missing from the FB-2. You'll notice that this knob makes a slight scraping noise when you turn it. Fear not, as that is totally normal, and is simply the sound of the Bias changing and settling on the FET MuAmp. The FatBoost 3 gives you the feeling that your amp is cranked at living room volumes so your playing is more dynamic and notes hold on longer without being distorted. It makes up for all the tone loss that (even true-bypass) pedals impart to your sound, especially if you have a lot of pedals on your pedalboard.

 

Features:

• 11-position gain control
• Additional stage of FET
• Cures v1's huge bass increase and dull high-end issues
• Class-A, FET (Field-Effect-Transistor)
• 35db of non-distorted gain
• Super-bright LED
• 5-year Warranty
• Instructions

Price Range : USD126.65 - USD139.99